How To Fix The 5B00 Error Message
What does the Canon error code 5B00 refer to? This is a sign that the waste ink counter has exploded and you will need to reset the Canon Waste Ink Counter. There are three blinks on the printer, such as orange light- 7 times. Alternately, you can choose between Orange (power) or Green (power).
The operating system also shows the error “Support code 5B00” below. This means that your Canon printer Waste ink Counter is full and you will need to reset it.
How can I fix the Canon 5B00 error? Canon 5B00 error
Canon printer ink cartridges are more likely to spill ink than they used to. This is because the ink system installs continuously and cartridges are properly installed.
Canon printers are among the most popular on the market. canon support code 5b00 They use the continuous Ink System for several models. These printers have some fundamental problems. Today we will discuss these and show you how to fix them.
Installing a continuous Ink system is not only economical but also more efficient. This system can sometimes have some drawbacks, such as the fact that the cartridge is only designed to print 200 pages per month. The Continuous Ink System will make it impossible for the printer to exceed this limit.
The CISS can also cause the ink to spillage in the printer. In this case, the printing pads are filled and the 5B00 error code is created. We will now show you how to fix this error so that you can continue using your printer.
There are several solutions:
These solutions require patience and you need to read many of them. If you have any questions, you can leave a comment.
How to fix the 5B00 error message when printing with Canon printer.
The first step to fix the Canon 5B00 error
We will first show you how to reset the factory settings of your printer. This will allow you to work on the entire printer and not just on ink pad issues. This procedure will resolve all issues that could arise in your specific Canon printer model.
Turn off your printer and keep it on during the process. We usually use the stop/reset button.
This is the preferred method for both regular and non-multifunction printers. The button in this post applies to any printer type, with or without Inkjet systems. Once you’ve completed this, your printer name will now have the words “copy1”, which will be connected to your computer. This post will show you how to set up a default printer.
Step 1:
First, turn off your Canon printer.
Step 2:
Keep the stop/reset button down by pressing and holding it down.
Step 3:
While you are holding the stop/reset button down, turn on your stop/reset. This will turn on the printer again.
Step 4:
The stop/reset button should be turned off. Press it again twice in a row with light tapping movements. While doing so, don’t forget the on/off key must be pressed.
Step 5:
Turn all keys that you were pressing down, and then wait for the rest to appear on your screen.
Step 6:
Next, press the stop/reset button 5 more times. Then touch the on/off switch two times quickly.
The second method to fix the Canon 5B00 error
This tutorial is compatible with multifunction printers. If the printer is in service mode, you can resolve this issue by telling the printer to think that the ink absorber pads are empty and not full. The ink deposit can be opened and cleaned.
It is possible to clean it by placing a napkin over it. This will attract as much ink as you can and help clear away the deposit.
Step 1:
First, turn your canon multifunction printer on. Because of the direct work on the printer’s settings, we will continue to use the yes printer throughout the entire process.
Step 2:
Second, click the menu button on your printer.
Step 3:
Put your canon printer into service mode. To do this, press the SCAN/COPY/SCAN buttons in the exact order. The entire English service mode menu is available in English.
Step 4:
Keep pressing the + key until the COUNT AESS option is visible. Once you’ve reached the COUNTY ACCESS option, press the OK button.
Step 5:
On the printer’s screen, you will see a page counter. It shows the total number of pages printed. Is it too much?
Step 6:
Click the OK button.
Step 7:
Click the “COPY” button.
Step 8:
To lower the score, use the – key and then press OK.
Step 9:
Continue using the +symbol for the menu. Once you reach SCAN PAGE COUNT, stop. This will reset the counter to zero to erase the score on the page count on our Canon printer. It is only visible when the printer is in service mode.
Step 10:
Slowly navigate the menu until you reach the ABS-M DO NOT COUNT option. Click OK to reset this score to 0.
Step 11:
After everything has been done, press the stop/reset key.
Step 12:
Turn off your printer and then turn it on again using the on/off switch.
If you see the VALID KEY message on your computer screen after this process is completed, disconnect the power cable from the printer and reconnect it again.
A third way to fix the Canon 5B00 error
This will resolve the matter, but it will directly affect your printer’s system that is now noticing that ink absorber pads are full. To do this, you will need to install restoring software that helps you manage the internal processes of your printer. This program will take care of all configurations necessary on your computer. canon 5b00 error The 5B00 error code could appear again if you connect the printer to another computer.
The fourth method to fix Canon 5B00 errors: Use WIC Reset Utility to fix Canon 5B00 errors
Download Canon Reset Tool – WIC Reset Tool
Get the LATEST version here of the WIC reset utility
To reset the Canon 5B00 waste ink counter error, you must put the printer into service mode
Then, use WIC Reset Utility Tool and the reset key to reset your Canon printer. It takes approximately one minute.
How do you put your Canon printer into service mode?
Step 1: Turn off your Canon printer.
Step 2: Keep the power button on your printer.
Step 3: Hold the power button on your printer.
Step 4: Press the POWER button while still pressing the RESET button on your Canon printer.
Step 5: Release the RESET button on your Canon printer five times.
Step 6: Press the POWER BUTTON to release your printer’s power button
Put Canon Printer in SERVICE MODE mode. This condition will detect new hardware.
Step 7: Wait for 20 seconds until OS detects NEW HARDWARE and then press CANCEL.
Reset Canon Printer 5B00 Ink Counter Error.
Please follow these instructions after you have put your Canon printer into SERVICE MODE
Step 1: Click the link to download the latest WIC Reset Utility.
Step 2: Please purchase the Canon Waste Ink Counter Reset Key here
Step 3: Run WICReset, click on the “Clear Waste Counters” button, review the list and click YES if they are all good to reset Canon Waste Counter.
Step 4: Enter your Canon Reset Key
Check the status of your Canon printer in the Control Panel. If it says “PRINTER IS ONLINE“, then your Canon printer is ready for printing.